Photoconductive terahertz transceiver

A photoconductive dipole antenna can be used as a transceiver, which alternately transmits pulsed electromagnetic radiation and receives the return signal. Preliminary results of using a photoconductive terahertz transceiver with femtosecond optics are reported     

Modeling of ion-bombardment damage on Si surfaces for in-line analysis

Structures and mechanism of ion-bombardment damage on silicon wafers exposed to plasma were investigated comprehensively. By using molecular dynamics simulations high-resolution transmission electron microscopy, and composition analysis by high-resolution Rutherford backscattering spectroscopy, features such as gradual transition from the SiO₂ surface to the Si substrate and interface roughness were addressed. On the basis of these findings, the optical model that addresses the characteristics of plasma-damaged Si surfaces is given for ellipsometric analysis. The proposed model includes an interface layer modeled as a mixture of SiO₂ and Si phases. A part of the interface layer could not be removed by wet-etching, signifying the distinct features of the interface layer that are difficult to remove. The proposed model is anticipated to be practical for in-line monitoring of plasma-induced damage.     

Finite Larmor radius effects on ripple diffusion in tokamaks

The confinement of alpha particle is important in tokamaks. The trajectory or confinement of alpha particles is often calculated with guiding center approximation. The features of spherical tokamak can break the approximation. We investigate finite Larmor radius effect. The orbit calculated by equation of motion is different, especially in toroidal direction, from that by guiding center equations. This difference causes difference of ripple resonance energy and the difference of the peaks of the diffusion coefficients. Furthermore, because of the additional free parameter, Larmor phase, the peaks of diffusion coefficient calculated by equation of motion are broader than those by guiding center equations.     

Crystal growth of MgAlB14-type compounds using metal salts and some properties

LEAlB₁₄ (orthorhombic, Imam) (LE = Li, Mg) crystals were grown using metal salts (Li₂CO₃, LiF, LiI, MgO, MgF₂, MgI₂) and crystalline boron from a high-temperature aluminium metal flux. The growth conditions for growing LEAlB₁₄ were established using the starting mixtures of B/LE = 2.0, and Al metal was added to each mixture at a mass ratio of 1:15–20. LEAlB₁₄ crystals from the Al-self flux using metal salts could be obtained from all the different salts. The maximum dimensions of LiAlB₁₄ and MgAlB₁₄ crystals were approximately 18 and 12 mm for the crystals obtained from LiF and MgF₂. The unit-cell parameters of as-grown LEAlB₁₄ are as follows: for LiAlB₁₄, obtained from LiF, a = 0.5846 (2) nm, b = 0.8144 (2) nm, c = 1.0355 (3) nm, V = 0.4930 (2) nm³: for MgAlB₁₄, obtained from MgF₂, a = 0.5845 (2) nm, b = 0.8114 (2) nm, c = 1.0330 (3) nm, V = 0.4899 (3) nm³. Microhardness, oxidation resistance and magnetic susceptibility of these materials are described in detail.     

Synthesis of ordered mesoporous carbon thin films at various temperatures in vapor infiltration method

Mesoporous carbon thin films with ordered structures were prepared by using resorcinol-surfactant self-assembly. A mixture of resorcinol, surfactant, and ethanol coated on silicon substrates was exposed to formaldehyde vapor as a cross-linking agent to form structured resorcinol/formaldehyde resin films. The films were then carbonized at 800 °C in an inert atmosphere to remove the surfactant and to obtain structured carbon materials. With this vapor infiltration method, thin films with several structures were obtained from the same precursor solution by employing different vapor infiltration temperatures. The results were interpreted from the transformation of the self-assembly during the vapor infiltration process.     

A statistical evaluation of the free energy of Fe-base ternary ordering alloys

The free energy of the Fe-base ternary ordering alloys whereB2 andD0₃ ordered structures are formed is evaluated. The statistical theory is employed using a pairwise interaction approximation taking into account not only the atomic interaction but also the magnetic interaction, based upon the Bragg-Williams-Gorsky model. The application of this model on Fe-Si-Co ordering alloys are demonstrated. The propriety of the calculation results are performed by comparing the experimental results. The influences of the magnetic energy to the stability of ordered structures are also demonstrated.     

An adaptive array utilizing an adaptive spatial averaging technique for multipath environments

When the interference is coherent with the desired signal, the conventional adaptive arrays working under the guiding principle of output power minimization tend to cancel the desired signal by using the coherent interference. A technique is described which enables the adaptive array to function even under such an environment. The array is divided into subarrays, whose input correlation matrices are adaptively averaged so as to produce a Toeplitz matrix which would be obtained when the interference did not correlate with the desired signal. The averaged matrix is now free from correlation terms between the desired signal and interference, and therefore may be used to derive the optimum weight for the array element just as in the ordinary radio environment of incoherent interference. Numerical examples show that the new adaptive array is highly capable to suppress the coherent interferences as well as incoherent ones.     

Microstructures of Annealed TiNiSn-Based Alloy Ribbons

The thermoelectric half-Heusler compounds Ti _x NiSn_0.998Sb_0.002 (x = 1.0 to 1.2) and Ti _y Zr_0.25Hf_0.25NiSn_0.998Sb_0.002 (y = 0.5 to 0.65) with nonstoichiometric nominal compositions were prepared by spin-casting and subsequent annealing at 1073 K for 24 h. The dimensionless figure of merit ZT at room temperature was maximized at x = 1.1 and y = 0.6 in Ti-rich compounds through an increase in absolute Seebeck coefficients despite a decrease in electrical conductivities. ZT reached 0.07 at x = 1.1 and 0.14 at y = 0.6. In powder x-ray diffraction analysis, minor phases of β-Sn, TiNi, Ti₂Sn, and Ti₅Sn₃ were observed in addition to a major phase of half-Heusler. The quantity of the minor phases was minimized at x = 1.1 and y = 0.55, where the absolute Seebeck coefficients are maximized. In transmission electron microscopic (TEM) analysis of Ti_0.55Zr_0.25Hf_0.25NiSn_0.998Sb_0.002, crystal grains of the half-Heusler phase, from several hundred nanometers to several micrometers in size, were observed. TEM energy-dispersive spectroscopy measurements indicated that fluctuations of Ti, Zr, and Hf compositions within the Ti-site in the half-Heusler phase may occur. Thermoelectric properties were improved at x = 1.1 and y = 0.6 rather than at the stoichiometric compositions of x = 1.0 and y = 0.5 due to minimization of the precipitate quantities.     

Functional analysis of genes encoding putative oxidoreductases in Aspergillus oryzae, which are similar to fungal fructosyl-amino acid oxidase

We found 11 genes (FAO1-11) encoding putative oxidoreductases in the Aspergillus oryzae genome, which are similar to fungal fructosyl-amino acid oxidases. The cDNAs corresponding to the genes were cloned and expressed in Escherichia coli. rFao2 had fructosyl-amino acid oxidase activity, whereas rFao1 did not show any enzyme activity, even though the deduced amino acid sequence of Fao1 is identical to that of one of the fructosyl-amino acid oxidase isozymes from Aspergillus oryzae. rFao7 and rFao8 showed oxidase activity toward sarcosine, L-pipecolate, and L-proline. rFao10 was active toward only sarcosine, of the substrates tested. The functions of the other proteins were also predicted from a phylogenetic analysis.